Design Ceiling fan DC 132 cm motor gray basalt blades Abs wood, pure white light point.
Model: "Flat Wood Wing"
Falt Wood Wing is a design ceiling fan with a contemporary look, is powerful, equipped with a DC motor, and is very discreet.
This fan consumes between 4 - 30 Watts at lowest and highest speed, which makes it a reallz economical fan. Its engine is made of 100% copper that allows it to operate without temperature rise and therefore without dilation and deformation, to avoid friction and so, not to generate noise.
However, the Flat Wood Wing is not certified in Hyper silence as its blades are very curved wich increases the noise. The sound level is therefore 41 dB (a) to 51 dB (a) on the 5 speeds offered by this fan.
It will therefore be recommendable to install it in a living room rather than in a bedrooms.
This fan is controlled by a remote control, over which all its functions are availavle, including an 8 hour timer, a memory function, and the summer/winter function.
Falt Wood Wing is also an air destratifier, indispensable support for your heating if your ceiling is higher than 3 meters.
The Falt Wood Wing light is an 18 watt and 1400 Lm LED spot light point.
This fan' s total height is 46 Cm but you can reduce it to 30 Cm if you wish.
Technical characteristics :
For areas: 17 - 35 m2
Lighting system: LED 4000 K 18 Watts 1400 Lms.
Control: Remote Control with Inverter
Timer: 8 hours
Reversible system: Yes
Number of Speeds: 5
Finish: 3 blades Abs wood color, body and foot dark basalt gray.
Possible installation on a sloped ceiling at 10 °: YES
Diameter: 132 cm
Total height: 46 cm, you can reduce the foot up to 30 cm.
Weight: 8.5 Kg
Warranty: 2 years for the engine
Color: Basalt gray wood